DFRduino (Arduino) Nano V3.0
This DFRduino Nano is an Arduino compatible Nano V3.0, a breadboard friendly microcontroller based on Atmel ATmega 328. It has a built-in mini-B USB jack and therefore dos not require a DC power input.
The Nano is user friendly and embraces more or less the same electrical features of an Arduino Duemilanove board, whilst accommodating more analogue input pins and an onboard +5V AREF jumper. Furthermore, the Nano's built-in function which can automatically sense and switech to the potential source of higher power makes the traditional power jack and selcect jumper unnecessary.
The controller benefits from 32 KB flash memory, 2 KB of SRAM and 1 KB of EEPROM.
The Nano is user friendly and embraces more or less the same electrical features of an Arduino Duemilanove board, whilst accommodating more analogue input pins and an onboard +5V AREF jumper. Furthermore, the Nano's built-in function which can automatically sense and switech to the potential source of higher power makes the traditional power jack and selcect jumper unnecessary.
The controller benefits from 32 KB flash memory, 2 KB of SRAM and 1 KB of EEPROM.
| Specifications | -Microcontroller: Atmel ATmega328
-Operating Voltage (logic level): 5V -Input Voltage (recommended): 7-12V -Input Voltage (limits): 6-20V -Digital I/O Pins: 14 (of which 6 provide PWM output) -Analogue Input Pins: 8 -DC Current per I/O Pin: 40mA -Flash Memory: 32 KB (of which 2KB is used by boatloader) -SRAM: 2 KB -EEPROM: 1 KB -Clock Speed: 16 MHz -Dimensions: 0.73" x 1.70" (inch) |
You may also be interested in the following product(s)
|
Arduino Nano IO Expansion Shield
£ 5.00
|
