Arduino Motor Drive Shield (L293B)
This DFRduino Arduino motor drive shield allows an Arduino Duemilanove or Arduino Mega to drive two channel 7-12V DC motors. It uses a L293B chip which deliveries the output current up to 1A. This shield can be directly mounted onto standard Arduino Duemilanove or Mega boards.
The speed control is achieved through the conventional PWM which can be obtained from Arduino’s PWM output Pins 5 and 6. The enable/disable function of the motor control is signalled by Arduino Digital Pins 7 and 8. The motor shield uses PWM output Pins 6 and 9 and Digital Pins 7 and 8.
Features:
1. 2-channel 7-12V DC motor drive
2. Up to 1A current output each channel
3. Pins 5, 6, 7 and 8 are used to drive motors
4. supports PWM speed control
The speed control is achieved through the conventional PWM which can be obtained from Arduino’s PWM output Pins 5 and 6. The enable/disable function of the motor control is signalled by Arduino Digital Pins 7 and 8. The motor shield uses PWM output Pins 6 and 9 and Digital Pins 7 and 8.
Features:
1. 2-channel 7-12V DC motor drive
2. Up to 1A current output each channel
3. Pins 5, 6, 7 and 8 are used to drive motors
4. supports PWM speed control
| Compatibility | The shield is compatible with: -Arduino Diecimila -Arduino Duemilanove -Arduino Mega |
| Downloads | Manual |
You may also be interested in the following product(s)
|
DFRduino (Arduino) Mega
£ 22.50
|
DFRduino (Arduino) Duemilanove 328
£ 18.20
|
